Saga Hf Wood Dryer Kiln / Hf Vacuum Wood Timber Dryer Made in China Hfvd120-SA

• After-sales Service: Online Support
• Warranty: 1 Year
• Type: Wood Dryer Machinery
• Model NO.: HFVD120-SA
• Controlling Mode: PLC
• Feed Mode: Mechanical
• Certification: CE
• Stack Timber Capacity: 12m3
• Hf Output Power: 50kw
• Hf Oscillation: 6.78MHz
• Power of Vacuum Pump: 7.5kw
• Vacuum Range: -0.01- -0.09MPa
• Tank Thickness: 12mm
• Temperature Test: Fiber Optic Glass Temperature Sensor
• Moisture Test: Weighting System
• Main Spare Parts: Schneider/Siemens/Omron
• Transport Package: Seaworthy Packing, Cover with Plastic and Foam,
• Specification: 9300*2300*2300
• Trademark: SAGA
• Origin: Hebei. China
• HS Code: 8514400090
• Production Capacity: 10

Product Description

Product Description

High frequency vacuum wood dryer is smaller but fast lower temperature drying dryer, suitable for all kinds of wood drying, from veneer/lamina /board to thick lumber, even heavy timber. For thin piece like veneer or floor board lamina, HF vacuum drying not only offer you short cycle solution but also eliminate the problem of curve or shrink. For thick and hard wood, HF vacuum drying brings you good quality wood with uniform humidity, free of split or spark both on surface or inside, short drying cycle will help you a lot to meet your demand for production.

* CHARACTER
High frequency vacuum drying technology constitutes a combination of two special methods: heating by high frequency current and drying in vacuum where the boiling point of water is decreased with decreasing pressure.
A. High frequency heating:
High frequency power acts only on the moisture of the wood, it penetrate the wood and where there is water or moisture, there is high frequency power.So it dries fast and uniformly
B.Vacuum condition:
* At vacuum condition, the water is vapored at very low temperature, so this eliminate the problem of sparking or spliting
problem for hard wood, especially for the type of extremely hard wood that likely to spark if drying temperature is too high.
* Further more, vacuum condition create a minus pressure in the tank, the movement of water through wood increases leading to shorter drying time than can be achieved at atmospheric pressure, this minus pressure suck the water or moisture out of the wood fast.

.CHARACTER OF SAGA'S HF VACUUM WOOD DRYER
A.SAGA OFFER YOU ONE BUTTON CONTROL TECHNOLOGY
Full automatic drying program with-in PLC control system for different type of wood, your worker do not need to know too much knowledge about wood drying to cook your wood perfect.
B.PRECISE AND RELIABLE MONITORING SYSTEM
High precision and stable monitoring spare will always guide on your machine both for warrantee of good drying quality or safety of personal and machine.
C.WELL SELECT SPARE PARTS
We choose high grade stable spare parts which is tested for long time for your machine to make it stable running and problem free.
D.LOGICAL AND SAFE DESIGN
With more than 20 years of experienced engineer, you can expect a more logical and humanistic machine that very easy to use, stable running and help you a lot in production.

Specification
Optional model: HFVD30-SA /  HFVD45-SA /  HFVD60-SA /  HFVD100-SA /  HFVD120-SA

		HFVD30-SA	HFVD45-SA	HFVD60-SA	HFVD100-SA	HFVD120-SA
Overall Dimension (mm)	High frequency generator	1450*1300*2050
	Tank	4200 * 2150 * 2000	5700*2150*2000	7300*2150*2000	7300*2400*2000	9300*2400*2000
	Cooling and Vacuum system	1650*1050*1250
Gross Weight		6.4T	7.3T	8T	9.2T	13T
Inside Diameter(mm)		Ф1700	Ф1700	Ф1700	Ф1900	Ф1900
Stack Timber Size(mm)		3000 * 1000 * 1000	4500 * 1000 * 1000	6000 * 1000 * 1000	6000 * 1300 * 1300	8000 * 1300 * 1300
Stack Timber Capacity		3m³	4.5m³	6m³	9.3 m³	12.5m³
HF Output Power		30Kw	30Kw	30Kw/50Kw	50Kw	50Kw
HF Oscillation		6.78MHz
Protection		Overload protection/Wind cooling pressure detection/Filament 2 stage starts/Lose phase protection
Turning Mode		Variable vacuum capacitor
Cooling Type		Force wind cooling
Main Spare Parts		Schneider/Siemens/Omron
Hydraulic System		Taiwan-KOMPASS
Temperature		45-70ºC
Temperature Test		Fiber optic glass temperature sensor
Moisture Test		Weighting system
Dewatering		Full automatic
Cooling in tank		Condensation system
Tank Thickness		12mm
Stacking Way		Manual
Feeding Way		Full automatic
Pressure		4T/8T
Power of vacuum pump		7.5Kw
Vacuum Range		-0.01- -0.09Mpa
Cooling Type		Stainless steel water-ring vacuum pump
Controller		PLC
Outside Temperature		1ºC-45ºC

 

Details Images

FAQ
1. who are we?
We are based in Hebei, China, start from 2010,sell to Eastern Asia,Mid East,Domestic Market,Africa,Southeast Asia,South Asia,Southern Europe,Northern Europe,Oceania,Eastern Europe,South America,North America. There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
high frequency generator,high frequency vacuum wood dryer,high frequency edge gluer,high frequency plywood curved press,high frequency frame assembly machine

4. why should you buy from us not from other suppliers?
We are first one which can make full-automatic control system for High frequency vacuum wood drying .

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Escrow;

6. Provide customized machine Yes or NO?
     R: Yes. We have professional designers and engineers to supply customized machines. 
7.  Q: What is payment terms?
     R: 30%T/T in advance, the balance paid before shipment after inspection.
8.  Q: What is the warranty time?

     R: One year.
9.How long does it take to dry a batch of wood?
We need to know your wood type,thickness,moisture to check the drying time.